Boneham and Turner Limited
Established 1918 Boneham & Turner Limited
Oddicroft Industrial Estate
Oddicroft Lane
Sutton-in-Ashfield
NG17 5FS
United Kingdom
Boneham and Turner Limited
Headed Press Fit Drill Bushes
This range of drill / jig bushes is similar to the PP range, but for the head. The headed drill bush type contain a ‘top hat’ or ‘shoulder’ at the top of the bush to allow greater axial force, so not to slip out the plate, and aids where it is desired, to feed down to a dead stop. The head of the bush also allows it to be pressed into the plate easier and can be left either exposed above the plate surface or counterbored to sit flush. These bushes are denominated by the PH reference for metric drill bushes and S for the imperial bush.
How to buy
Please choose from the following drill bush options and click through to the product page.
All drawings for these items are available in our catalogue on the download section of the site.
| Sub-Total: | £0.00 |
| Delivery: | £0.00 |
| VAT: | £0.00 |
| Total: | £0.00 |
