Drill bushes: Plain, headed, renewable, liner, anchor, or mould box, Bonehams have the combination of drill jig bushes to meet your requirement. Both metric and imperial sizes are available and are manufactured to BS, ISO, and DIN standards.
For longer life, nitrided drill jig bushes are also available. If your
need is for a non standard jig bush our customer services will be happy
to provide you with price and delivery. Please contact
us to make any enquiries about our drill jig bushes range.
Headless type, press fit jig bushes:
This type of bush is normally used for jigs where an economical bush is required of the lowest cost. They also afford the minimum spacing between the bushes.
Headed type, press fit bushes:
This range is the same as above but headed, the head is convenient for presssing the bush home. The head is
also useful when it is desired to feed down to a dead stop.
Fixed and slip renewable bushes:
These two features are incorporated on one bush, which is used in conjunction with liner bushes, and is held in place by a lock screw, tenon or stop pin. The bush is a slide fit in its corresponding liner.
The removable fixed feature of the bush is normally used in high production work, where the bush can be easily and quickly replaced with a minimum loss of production.
The removable slip feature of the bush is used when more than one operation is carried out, the bush is instantly removable after each operation.
Headless liner type bushes:
This range is for use in conjunction with renewable fixed and slip type bushes.
Headed liner type bushes:
The range is the same as the plain type, except headed. The shallow head can be left standing proud, or countersunk flush.
