Strapped Anchor Bushes
A B&T Anchor Bush is a two-piece assembly consisting of a hardened steel bush with a bore to suit the appropriate drill size and a low carbon steel anchor which is either weldedor riveted to the drill template. This anchor bush strap only holds the bush firmly in place and has no influence on location which is obtained from a spigot on the bush machined concentric with the bore. Thus Anchor Bushes can be spaced accurately, when desired, by Jig Boring the template. On many applications, however, marking out and either punching or drilling the locating holes is sufficiently accurate. B&T Anchor Bushes are made in Standard and Corner types and by using a combination of the two various hole patterns as shown in the Boneham & Turner catalogue.
PLEASE NOTE: The pictured straps DO come with the relevant bushes in the anchor bush assembly.
All drawings for these items are available in our catalogue on the section of the site.
- Two piece assembly
Hardened drill guide with locating spigot that is concentric to the bore
Strap can either be welded or riveted (choose rivet type).